The 4200W Solar Pure Sine Wave Inverter forms an ideal solution for both self-consumption and grid feed-in applications. This inverter provides an integrated 120A MPPT solar charge controller and supports up to 98% solar power conversion efficiency.
[pdf] DC pump dedicated inverter (also known as DC-DC controller) is directly connected to the solar panel, without the need for batteries or AC conversion, and optimizes the output of the photovoltaic array through the MPPT (maximum power point tracking) algorithm to match the voltage and current requirements of the DC water pump (such as permanent magnet brush less DC motor).
[pdf] A well pump is going to be one of the biggest power draws in any solar system. That is why you need to configure the system so it is as efficient as possible. This starts with having the right inverter, so hopefully this guide was able to help you. .
An AC well pump requires a lot of power to start up and run. It is comparable to running an air condition on solar, so make sure your inverter can handle its requirements before. .
A 4000W inverter can run a 1.5 AC well pump for 2 to 3 hours. The runtime assumes the pump runs for 20 minutes an hour and is rated 1 to. .
Majority of AC well pumps used in homes are 1 to 1.5 HP, so that is what we will use here. If you have a 1.5 HP pump, its running watts is. .
AC well pumps are more affordable than DC pumps and easier to maintain. DC pumps are more efficient, but for home use, an AC system.
[pdf] 
