A well pump is going to be one of the biggest power draws in any solar system. That is why you need to configure the system so it is as efficient as possible. This starts with having the right inverter, so hopefully this guide was able to help you. .
An AC well pump requires a lot of power to start up and run. It is comparable to running an air condition on solar, so make sure your inverter can handle its requirements before. .
A 4000W inverter can run a 1.5 AC well pump for 2 to 3 hours. The runtime assumes the pump runs for 20 minutes an hour and is rated 1 to. .
Majority of AC well pumps used in homes are 1 to 1.5 HP, so that is what we will use here. If you have a 1.5 HP pump, its running watts is. .
AC well pumps are more affordable than DC pumps and easier to maintain. DC pumps are more efficient, but for home use, an AC system.
[pdf] Pure sine wave inverters: These inverters generate a smooth, sinusoidal waveform that closely mimics the power from the utility grid. Pure sine wave inverters are recommended for sensitive electronics and high-power appliances.
[pdf] This article presents the first kW-Class, 3-phase GaN-based inverter. Hard-switched at 100-kHz PWM, its heart is a 6-in-1 power module with 600-V GaN power HEMTs, achieving a new efficiency of 98.5%, a more than 2% improvement.
[pdf] 
